WB-O2 Nano Module & Wiring 6ft


Waterproof wideband O2 sensor display module unit with 6.5 ft harness included. O2 sensor sold separately. Reads on CAN connection with a Fueltech ecu or analog output 0-5v to be used with any other ecu or datalogger. Very simple installation.

WB-O2 Nano Module & Wiring 6ft

Share on facebook
Share on google
Share on twitter
Share on linkedin


59 / 100

This is only the module unit with 6 ft harness NO sensor included. If you need the sensor, please see our other products. 

The WB-O2 Nano features an extended reading scale down to 0.35 λ*, or 5.15 AFR gas or 2.24AFR Alcohol compact size and CAN communication with our Power FT line ECUs. This is very useful when using O2 sensor per cylinder.

The O2 sensor reading is sent to via CAN to the ECU and recorded in the internal datalogger, without using any analog input. 

 It can also be used with any other ecu or by itself to read your Air Fuel Mixture.

 Kit comes with Module and  6ft harness

• Waterproof (IP67)
• Extended reading scale 0.35λ to 9.99λ, 5.15 to 147 Gas A/FR, 2.24 to 64 Alcohol A/FR*
• Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors
• CAN communication with FT600 / FT550 / FT500 / FT500LITE / FT450: sends the O2 reading via CAN to the ECU, freeing up the analog inputs
• Allows several conditioners connected to the CAN network, for use with individual cylinder reading or bank reading
• Easy viewing and small compact size
• 0-5V analog output for connection with stand alone ECU or any external datalogger
• Update via CAN (FT500 connection required)
• WB-O2 Nano has replaced the previous WB-O2 Meter Slim

Cart Item Removed. Undo
  • No products in the cart.