The harness is fitted with a 16 way CPC firewall connection making adding the coils and FTSpark-8 a simple installation! The harness includes all terminations to suit the FuelTech CDI racing coil’s, FuelTech CAN connection and output controls. The FuelTech PRO550/600 FTSpark-8 harness has a label for each connector and the insulation is heat, moisture and oil resistant.
- For use with our FTSPARK-8 CDI module and FuelTech CDI Racing Coils.
- FTSPARK is a high power CDI ignition module compatible with ANY ECU on the market.
- Specifically designed to plug n’ play with our PRO600 harness.
If you are intending on using this harness with another ECU manufacturer, you will need to modify it and add 7 additional outputs wires.
- This harness is built using a serial bus connection (1 wire) which only works with FuelTech ECUs – FT450 and above.
- Uses Outputs B (Gray wires) on PRO600 Harness.
- Includes: CAN connector, power and ground ring terminals (battery) and 10-way Connector with wires for connection with the ECU and CPC connector for the firewall.
*Please contact us with any questions to confirm compatibility with your setup.